Trimmer Trucks for Pros

The redesigned Terex XT Pro Series Tree Trimmer trucks are designed to meetthe needs of tree care professionals. These new over-center aerial devices havethe same features that made the company’s previous tree trimmers popular:simple, reliable operation, low maintenance and lightweight design. The XT ProSeries tree trimmers also boast a host of new features, including a longitudinalhydraulic lift option to provide up to 75 feet of working height, upper boomarticulation of 250 degrees and 125 degrees of lower boom articulation. Allthree models featureuser-friendly designelements, includinground pedestals foreasier access to bearingbolts, a platformcapacity of up to 400pounds, and an elbowcylinder that is fullyretracted when stored.

A Stump Cutter for Tough Terrain

Rayco’s RG35 Super Jr stump cutter is now available with four-wheel drive.The 4×4 option is available on new machines and as a retrofit kit for older RG35Super Jr machines. All RG35s feature a 35 hp Vanguard engine and swing-outcontrols that offer visibility while cutting and swing in for travel through gates.Other features include wide, bar-tread floatation tires; hydraulic backfill blade;and 51-inch cutting width.

Tree Care Is In the Air

Arborjet’s new QUIK-jet Air is an air-poweredtrunk-injection device designed to deliver preciseformulation dosing in a matter of seconds. Itsinnovative design combines the simplicity of theQUIK-jet and power of the VIPER air hydraulic systems.The QUIK-jet Air features one-thumb switchoperation, precise dose measuring and air-poweredinjection. The rugged aluminum body weighsless than 2 pounds and is ergonomically balancedfor hand comfort.The QUIK-jet Aircomes in its own kitbag with a shoulderstrap, compressedair tank, drill bits,cleaning solution,and extra pocketsfor tools and supplies.

Midsized Mulching Tractor

The FTX290 is a low ground pressure (3.4 PSI)tractor with an oscillating steel track undercarriage,providing balanced traction for rough or soft conditions.The FTX290 features a spacious cab, ergonomiccontrol layout and maintenance-friendlyservice access. Powered by a Cummins QSC8.3 290hp diesel engine, the hydraulic flow to the mulchinghead peaks at 100 GPM. The FTX290 has the FeconBH120 Forestry Mulcher with variable speed motorsand three optional rotor systems including Fecon’snew Depth Controls Rotor (DCR) technology.

Stump Grinders to Go

New from Bandit Industries, themodel 2600 and model 2700 towablestump grinders. With hydrostaticdirect-drive there are no belts, jackshafts,bearings or associated partsto maintain. Power application withhydrostatic direct-drive is smooth,making the model 2600 and model2700 easy to operate from swingoutcontrol panels or optional radioremotes. The model 2600 features a61 hp diesel engine, and the model2700 features a 97 or 115 hp diesel engine. Both machines ride on Torflex axlesand go after stumps with swing arcs greater than 5 feet.

Land Pride STP15 Tree Puller

The Land Pride STP15 Tree Puller removes shrubs, saplings and small trees,pulling them from the ground, roots and all. The serrated teeth and 10-inchjaw opening allow theoperator to grasp and pulla wide range of trees andposts. The teeth are lasercut from 5/8-inch steeland measure 16 inches inlength. Features a 2.5-inchsolid, greaseable pivot pin.