Kappen Tree Service reaps the benefits of a compact tree trimmer for distribution rights-of-way.
When it comes to clearing the strips of land along utility lines, or the rights-of-way, many contractors have struggled to find an efficient method of trimming trees.
For open areas, manufacturers have developed large-scale mechanical trimmers equipped with saw blades mounted on long booms. But, for distribution lines in metropolitan areas and other confined spaces, contractors are caught in a tight spot – literally. Most resort to using chain saws and bucket trucks, slowly working their way down the line.
However, for Kappen Tree Service, this approach simply wouldn’t work.
Based in Cass City, Michigan, Kappen Tree Service has been clearing rights-of-way for 20 years. Today, it services 4,000 to 5,000 miles each year, depending on budgets. Kappen holds contracts with multiple electric utilities for doing work along a variety of transmission, subtransmission and distribution lines.
Much of the contractor’s work started in the “thumb” of Michigan, where the landscape mainly consists of farmland and wood lots. Here it was easy for crews to get in and out with the seven, large-scale mechanical trimmers in their fleet. However, Kappen eventually started getting distribution contracts farther south into the metropolitan Detroit area, where heavier traffic and smaller working areas limited the use of large equipment.
“In the Detroit area, you can’t just drive down the road like you can in the northern part of the state,” says Warren Kappen, part owner of Kappen Tree Service.
As Kappen’s work started to shift south, he began looking for a more efficient alternative to trimming trees with chain saws and bucket trucks.
“We probably have 100 bucket trucks, but those guys have to raise the machine, trim the branch with a chain saw, come back down, and move the truck ahead to the next tree,” he says. Kappen also wanted something that could maneuver better than his bucket trucks. “They work in some of the small areas, but they’re just so clumsy.”
Eventually, Kappen discovered a new breed of equipment – the compact tree trimmer. These machines use a mini-excavator chassis, but, instead of having a hydraulic arm and bucket, they’re equipped with a saw blade on a nonconductive, hydraulically telescoping boom, similar to the larger equipment on the market.
The design of a compact tree trimmer lends itself well to the metropolitan applications that Kappen faces. With its small footprint, zero-turn radius and 360-degree boom swing, the machine is able to maneuver much more easily than other trimming equipment. Upon reaching the jobsite, it can quickly drive along the right-of-way without wasting any time being repositioned. Plus, the quiet operation is ideal for residential areas. Compact tree trimmers are also easy to transport, thanks to their small size. Unlike large-scale mechanical trimmers, which typically require a tractor-trailer to haul, compact trimmers can be towed from site to site on a standard trailer behind a pickup truck.
After discovering this new type of equipment, Kappen purchased a Kwik-Trim compact tree trimmer from Loftness and put it right to work, averaging about 20 hours on the machine per week. Immediately, he noticed the time savings the new trimmers offered.
“On a really good day, a two-man bucket crew might be able to trim 64 trees,” says Kappen. “That’s with both men averaging four trees per hour on an eight-hour day.” On the other hand, the compact tree trimmer works nearly four times quicker for Kappen. “I’ve seen one man do 250 trees in a day with this thing.”
To transport the compact trimmer, Kappen hauls the unit on the same trailer as his skid steer mowers.
“We pull the trimmer and mowers with a trailer behind a diesel dually pickup,” he says. “The guys move around pretty easily like that.”
Despite the advantages of the compact trimmer, it doesn’t quite replace Kappen’s larger trimmers, which reach up to 70 feet high, versus the 53-foot maximum cutting height of the Kwik-Trim. Therefore, Kappen continues to use his large trimmers mostly along transmission and subtransmission lines, while reserving the Kwik-Trim mainly for smaller distribution rights-of-way. For the tall branches that hang over the compact trimmer’s reach, Kappen’s crew comes back around to do the cleanup work by using off-road trucks and climbing trees. Nonetheless, Kappen finds that the compact machine still saves a tremendous amount of time.
“If we can get 90 trees out of 100 with the Kwik-Trim, we’ll save a lot of time,” he says. “Over the course of the season, it saves us hours, days, even weeks.”