Barnel International offers pruning tools and accessories used in landscape, horticulture, forestry and tree care.


Echo’s PPT-265 Power Pruner features a 25.4cc Power Boost Vortex engine, 12-inch Oregon Intenz bar and I-30 technology.

Fanno Saw Works

The FI-130PG pruning saw’s nonslip grip enables more control in wet conditions. The BS130 belted scabbard resists moisture.

Fred Marvin Associates

Fred Marvin Associates manufactures pole pruners, pole saws, hand saws, loppers, hand shears, and wood and fiberglass extension poles.


The 326P5x pole chain saw features Husqvarna’s E-Tech II engine, offering low emissions, noise and weight. Reaches up to 16 feet.


Jameson’s pruner features forged steel components and can be used with Jameson’s fiberglass poles.


The four-wheel drive All-Terrain Tree Trimmer features five tire options and a turntable base. The nonconductive fiberglass boom extends up to 75 feet.

John Deere

The PS2683LE extended-reach pole saw has a detachable, 83-inch boom and cuts branches up to 12 feet above the ground and up to 8 inches in diameter.


The SkyTrim 75XT rough-terrain tracked vehicle has a telescoping boom and saw-type cutter head with a Deutz, air-cooled diesel engine.


The HS65 26-inch hedge trimmer features double-sided, hardened steel blades that reciprocate in opposite directions while reducing vibration.


The HyReach clipper cuts at ground level, or the head can be power rotated for trimming limbs. The maximum cut is between 8 and 11 inches.


The CHTZ2401 12.5-pound hedge trimmer has a 24-inch, double-sided blade and is powered by a 23.6cc, Strato-Charged, two-cycle engine.

Sheyenne Tooling

The Tele-Saw is a hydraulically driven chain saw that allows operators to trim branches from the cab of a skid steer.


The P231 pole pruner has a 110-inch reach and a 22.5cc, 1.1 hp engine. Available in 8, 10 and 12-inch bar lengths with a 3/8-inch pitch saw chain.


The BIGBOY 2000 is a multipurpose folding saw with a slightly curved 14.17-inch blade that locks securely in two positions for flush cutting.


The 637 top-handle chain saw is driven by a 40.2cc, gas-fired, two-cycle engine. It has a 14-inch guidebar and is fitted with a half-throttle mechanism.


The HS 81 T C-E hedge trimmer features the Easy2Start system, 24-inch double-sided blade, rear swivel handle and 12.5-ounce fuel tank.


The TPS-260PF power tree pruner cuts branches up to 8 inches in diameter, comes with a 10-inch bar and chain and is powered by a 25cc, 1.3 hp engine.