Bandit Enters Partnership With New River Equipment To Sell The Revolution Stump Grinder Cutter Wheel


The Revolution stump grinder cutter wheel from New River Equipment Corp. is now available through Bandit Industries. Bandit has partnered with New River Equipment to distribute The Revolution wheel and associated parts, including the SaberTooth cutting teeth, for most stump grinder makes and models. It is available from Bandit or through any Bandit dealer as well as from New River Equipment. Bandit-specific wheels and parts are available only through Bandit.
The Revolution cutter wheel is also now standard equipment for all new Bandit stump grinders. Owners of older Bandit stump grinders can purchase The Revolution as an upgrade.
The key to The Revolution's performance is the spiral configuration of the teeth, combined with low-profile pockets that receive minimal wear while also minimizing chip spread. The lead teeth on the wheel are set at 57 and 20 degrees to complete the spiral of the side teeth up and over the edge of the disk, allowing for a more aggressive cut that also helps move material away from the stump. A variety of carbide teeth are available to best suit grinding conditions and machine horsepower, and their counter-sunk mounting in the pockets make them virtually unbreakable.  A LONG-SHORT lead tooth allows the cutting to take place further from the wheel, reducing wear. For high horsepower machines, a SHORT-SHORT carbide is used to reduce leverage and keep the cutting action closer to the pocket. The SABER tooth maximizes the cutting efficiency on lower horsepower machines and is designed to always have two sharp cutting edges as it wears, no sharpening required.